Ftp installation instructions for Spartan '06 version 129 with patch3. If Spartan '06 version 129 is already installed, patch3 can be downloaded and applied to the existing installation. The patch can be found here.
Spartan '06 for Linux is available for three different architectures.
32-bit version for Intel or AMD
64-bit version for Intel EM64T or AMD64
64-bit version for Intel Itanium2. (patch1)
To determine which version to download, run the following command on the system which Spartan is to be installed...
uname -m
Download Spartan '06 version 129 (32 bit)
Now, unpack the compressed tar archive into any directory. You will use
the
following commands. (assuming the archive was downloaded to "/tmp" and
the
program is to be installed into the "/usr" directory)
/cd /usr
tar -xvzf /tmp/spar129_ia32.p3.tar.gz
Next, run the installation program. The installation program should be run as the root user to allow Spartan to be configured for all users.
cd spartan06.129_26_int9
./sp_install
For further configuration options refer to...
Spartan '06 Installation Instructions
Download Spartan '06 version 129 for Intel EM64T/AMD64 (64 bit)
Now, unpack the compressed tar archive into any directory. You will use the following commands. (assuming the archive was downloaded to "/tmp" and the program is to be installed into the "/usr" directory)
/cd /usr
tar -xvzf /tmp/spar129_ia32e.p3.tar.gz
Next, run the installation program. The installation program should be run as the root user to allow Spartan to be configured for all users.
cd spartan06.129_26_int9e
./sp_install
For further configuration options refer to...
Spartan '06 Installation Instructions
Download Spartan '06 version 129 for Intel Itanium2 (64 bit)
Now, unpack the compressed tar archive into any directory. You will use the following commands. (assuming the archive was downloaded to "/tmp" and the program is to be installed into the "/usr" directory)
/cd /usr
tar -xvzf /tmp/spar129_ia64.p1.tar.gz
Next, run the installation program. The installation program should be run as the root user to allow Spartan to be configured for all users.
cd spartan06.129_26_int9
./sp_install
For further configuration options refer to...